Easy Vegan No Bake Fudge Recipe (2024)

FAQs

Why is my 3 ingredient fudge not setting? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Evaporated milk is often called for in fudge recipes, for the creamy milkiness it imparts, and this Rocky Road Fudge is no exception.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

To achieve this, let the mixture cool for 15 minutes before beating it. It will thicken as it cools, so when you beat the mixture, sugar molecules will have a tough time clinging to one another (it's like trying to swim in molasses!).

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough.

heavy cream and half and half are good substitutions for whole milk, if necessary. Heavy Cream. there is no substitute I recommend for heavy cream. Granulated Sugar.

What happens if I use condensed milk instead of evaporated milk? ›

These items are essentially the same with one big difference: no sugar is added to evaporated milk. Sweetened condensed milk also has 60% of the water removed, but contains 40% sugar. Due to the big flavor difference, they cannot be substituted for each other.

Almond milk is suitable for sweet dishes, whereas cashew milk can be used in both sweet and savory recipes. Like regular milk, you can heat a nut milk to reduce the water content. This creates an evaporated milk substitute, though it won't be quite as thick as regular evaporated milk.

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Without a candy thermometer, you can achieve this with what is called a “cold water method”. Fill a small glass with ice and cover it with water until it is ice cold.. Drop your hot sugar syrup into the ice water. When it clumps into a soft ball, it is the correct temperature.

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar.

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

However, homemade fudge doesn't always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.